DHE offers the Mica Band heater are a cost-effective and efficient solution to the heating needs of a variety of applications. These heaters are capable of reaching a sheath temperature of up to 500°C.The layer thickness of each layer of mica is selected with care to ensure that the insulating properties of mica are balanced against the ease of transfer of heat between the heating core and the machine barrel.Mica band heaters have a wide range of electrical termination styles and clamping mechanisms, as well as the ability to accept holes and cutouts. They can be used in a variety of applications, but are mainly used in the plastics industry.
| Sheath material | Stainless Steel, Mild Steel, and Galvanized Iron |
|---|---|
| Diameter | min 30 mm to 600mm |
| Length | min 20mm to 250 mm |
| Thickness | 4mm |
| Insulation thickness | 4mm + 6 mm |
| Voltage | 110 V, 230V, 440 V |
| Watt density | 10 w/ sq. inch |
| Resistance tolerance | ±5% |
| Sheath temp. | 300°C Max |
| Clamping | M6 Allen bolt with spring |
| Terminal | junction box, junction box with breaded wire, screw terminal |
| Conductor | Ni Cr 80/20 |
| Very Effective Heat Transfer |
| Feasible for Small Length |
| Operating Temperature up to 280° Degree |
| Mica of superior quality with superior dielectric strength |
| Need Very Low Heating Time |
| Blow Molding Machinery |
| Extrusion Machinery |
| HDPE pipe jointing material |
| Square or rectangle shape die |
| Drum heating |
© Copyright Dheheaters 2024. All Right Reserved. | Website Designed and Developed by SmartFish
